There are various kinds of Heat Press Machine, such t-shirt machine, mug machine, plate machine, cap machine, wine pot machine, 3D sublimation vacuum machine and swing heat press machine, etc. We offer you more choices. Today, let's talk about swing heat press. There is a big difference between swing heat press and regular heat press. The upside panel of swing heat press can turn 90 degrees to the right, which is more convenient and not easy to scald when you operate, especially for printing continuously. Therefore, there is also a difference on price compared regular heat press.

Swing heat press print evenly, which never happen crack and wrinkles when print textile, like T-shirt. But it limits the thickness of the object. Swing heat press machine can transfer different images and Logo on the cotton, fibre and polyester products and tiles and metal boards.

Features of Swing Heat Press:

1. Configure the integration of microcomputer temperature and time controller with high accuracy and auto-tracking function of temperature (accuracy of ± 0.5 ° C)

2. Heating wire and heating board Integrate, which is safe, durable and even pressure.

3. Special coating on the heating board avoid something sticked.

4. There time controller remind you by ringing when printing is finished.

5. Adjust pressure at any time.

6. Settle the silicon flat mat of high temperature resistance on the downside plate, which never be out of shape when temperature reaches 350 ℃.

7. Swing heating board is much more convenient to put the ready printing products on the working table.

8. The swing heat press owns higher springs providing support, and work for long time, it won't be distortion.

Instruction of Swing heat press (PS: protective grounding wire):

1. Turn on the machine, adjust the temperature and time needed (normally it's 180-200 ° C and 40-45 seconds.)

2. Put the printed object on the silicon flat mat flatwise, and stick ready images, and press the handlebar strongly till upside board connecting with downside board tightly (Pressure is less than 30KG, otherwise, the handlebar will be out of shape.).

3. Once settled time is over, the machine will ring, pull the handlebar in the original position.

4. If the paper is not hot, please wipe the paper with blackboard eraser evenly, finally tear off the paper in 5-10s.

5. If the paper is hot, please tear off it immediately after finish printing.

Regarding swing heat press, so much for here. Should have any questions, please contact VESUB without hesitation.

Please note Vesub sublimation cases while reprint it.System.String[]