One, what is the heat transfer inks, heat transfer inks can be of any use, heat transfer ink and ordinary inks differences in there?
Heat transfer inks is also called sublimation inks, belonging to the water inks, unlike other inks, heat transfer inks to high-temperature colour onto objects to show the original color, at first in the heat transfer paper printing color is not the final color, after high temperature to show the original time color.
Two, heat transfer paper can evenly, adequate to absorb heat transfer inks, in the condition of high temperature and the heat transfer inks absorption of fully released out from the paper, color will be transferred to the surface of transfer objects. Printing paper ordinary can also complete the transfer, but the transfer rate, namely transfer goods color relative heat transfer paper slightly worse.
Three, in order to make the heat transfer inks to the surface more (mainly non fabric), can be combined with heat transfer coating to achieve satisfactory output.
Four, scope of application of heat transfer process: The transfer process is applicable to the transfer of the fabric and after the coating treatment of the hard surface of an article. Fabric polyester and polyester-based, hard goods to high temperature, such as transparencies, metal, glass, ceramic, porcelain, PVC card, as long as the transfer the items high temperature, with the heat transfer coating, can dedicated ironers complete the transfer of the image.
Five, the dye-sublimation heat transfer inks in the high-temperature state phenomenon, the paper dye at high temperatures directly from a solid to high temperatures, into a gas, color heat transfer paper transferred to the surface of items you want to transfer.
Six, Production process of heat transfer process of printed cloth:
1. installation "inks-jet crazy" heat transfer for continuous inks supply system, check the nozzle is normal
2. open flat ironing machine, the control panel parameters were:185℃, 120 seconds preheating, ironing machine, at the same time pressure adjustment knob, the flat pressure to reach the best state;
3. Printer output image, the image must be mirrored output to dry for several minutes after
4. Finishing cutting on the image, only need to profile image, the image transfer on the cloth is not affected by the transfer paper, cause color deviation (this step can be omitted);
5. will be the transfer of the fabric lay flat to flat iron platform, 0 seconds) pull joystick to quickly remove the transfer paper, remove the printed finished fabrics.
Seven, the heat transfer process printed hard goods production process:
1. installation "inks-jet crazy" heat transfer for continuous inks supply system, check the nozzle is normal
2. open the ironing machine equipment, the control panel parameters according to the transfer of goods is set to the appropriate temperature is time, heat transfer equipment for different transfer articles of different parameters is not the same, to combine their experience selection, test equipment at the same time, preheating, pressure adjustment knob, the flat pressure to reach the best state
3. transfer goods surface uniformly spraying heat transfer coating, can be in a sealed, clean environment to dry naturally, also can choose the time suitable for the temperature in the oven accelerated drying coating, can also be homemade oven, plus a sealed space electric furnace, high temperature resistant coating is necessary in.
4. the following steps with "six" in 2,3, 4, 5.
Eight, heat transfer process printed fabrics Note:
1. to check the printer output nozzle is normal.
2. the mirror image output.
3. most crucial in the "six" - 5 should pay attention to quickly remove the heat transfer paper, if the transfer paper is not immediately taken out or transfer paper sliding will make the part not to solid color because of the upper paper hinder not promptly sent out, residue on the transfer paper, color in the cloth again, image ghosting caused, deficiency.
System.String[]