Mug press machines can be any color color, portrait, landscape pattern and other baked in mugs, especially suitable for use in advertising, gifts, promotional activities. It can also be used as personal items, and art appreciation and practicability.
Now we introduce how to use mug press machines baking sublimation mugs.
The parameters of mug press machines to first understand:
Mug press machines features:
1, electronic digital temperature display, automatic constant temperature;
2, high temperature resistant silicone rubber pad make baked printing pressure is uniform, 300 ℃ without deformation;
3, automatic time control;
4, convenient pressure adjustment.
Technical parameters:
Voltage: 220V power: 320 W working environment: 0 ℃ - 50 ℃
The humidity is lower than 85%RH, no corrosive gas.
Time control: 0-999 sec. Weight: 6.0KG
Packing size: 380 x 260 x 350 (mm)
Time and pressure adjustment:
Pressure: pressure adjusting screw adjustment handle, to increase or decrease the pressure;
Time temperature setting (red): open the power switch, press the SET key for 3 seconds, enter the menu, press ▲ or ▼ set parameters.
The symbols are as follows:
T time to control the set value; SP temperature control set value; Sc temperature deviation and correction, ± 20 ℃ (part of instrument with this).
Press the SET key to exit the setup, mug press machines start value according to the set, and shows the actual temperature, at the same time, OUT lights, stop heating when reaching the set temperature, time, OUT lights, lower display start time, set arrival time, stop the clock alarm.
Baking method:
1, the mug better pictures, bake the coasters, adjusting the top rod screw, let the pressure medium, and then close the pressure handle, plug in the power, open the power switch (red), indicating lamp is bright, open time switch;
Note: the pressure is not too large, otherwise it will cause the pressure handle deformation!!!
The picture on the wall of the cup, and the cup wall should be cut out of the same size, which is covered on the cup wall, glue stick is good, if the image itself is small, not enough to cover the entire glass wall, should also in the outside is covered with a layer of paper, to avoid the cup wall directly contact with roasted coasters, prevent the mug surface scorched or indentation.
2, mug press machines start according to the preset value of "SET" warming, reaches the set temperature (180 ℃), stop heating, the timer begins timing;
3, reached the set value (10-30 seconds), the buzzer alarm; for a longer time, can be reset switch (green) start (closed instantly open) once. (repeat length according to the experience of self)
4, turn off the power (red), remove the toasted mug, add water immersion times (must be immersed in cold water, to prevent the ink continues to spread, can be wiped out,).
Be careful.
(1) the machine must be in a setting cup when not in use, loosening and close pressure handle, in order to protect the baking mat.
(2) baked first mug, temperature is the temperature reached 180 degrees, 30 seconds to 60 seconds, you can remove the mug, such as add second mug, need to extend the time. The best in a mug is baked after shutdown, second Mug into, wait 1-2 minutes to boot, baking time is easier to grasp.
System.String[]